Should I remove Realtek Card Reader by Realtek Semiconductor? This package installs the software (Card Reader driver) to enable the following device.

From Update your SmartCardReader USB drivers for model SCR3310. SCM's SCR3310 and SCR3310v2.0 are small and ergonomic USB smart card readers, with backside mounting holes. The readers are ISO 7816 compliant, and can be used for cards in ID 1 card format. This installer contains PC/SC driver and CT-API library and can be used for SCR531 USB, SCR331 CCID, SCR333, SCR335, SCR355, SCR338, SCR3310, SCR3311, SCR3320, SCR3340, @MAXX Family and SCT3511 SCR331 and SCR531 users note that only readers that have CCID firmware are supported. Readers that have firmware Rev 2.0 and above are CCID.

This driver may also be used with the following third party products: Goldtouch ErgoSecure SC 2.0 keyboard, Datakey DKR830. If the host is running Windows 98 SE or Windows Me, ensure that Microsoft Smart Card Base Components are installed on the host before atempting to install the drivers.

Page Quick Links: Plug in your CAC reader NOW NOTE: Please check and make sure your CAC reader installed BEFORE you attempt to follow the driver installation instructions below. Most of the time, the New hardware wizard will install the CAC reader automatically, negating the need for you to install the driver manually. To Verify whether your driver did or did not install, follow these instructions: Plug your CAC reader into your computer before proceeding Windows 10: Right click the Windows logo (lower left corner of your screen). Click System, select Device Manager link (upper left corner of the screen), scroll down to Smart card readers, select the little triangle next to it to open it up. If your smart card reader is listed, go to the next step of installing the Vista, 7, & 8/8.1: Right click Computer, select Properties, Device Manager link (upper left corner of the screen), scroll down to Smart card readers, select the little triangle next to it to open it up.

If your smart card reader is listed, go to the next step of installing the NOTE: If you don't see it, you can also click Start, In the Start Search line type in: devmgmt.msc. (For Windows 8.1 users, you'll right click Start). XP: Right click My Computer, select Properties, Hardware tab, Device Manager button, scroll down to Smart card readers, select the + next to it to open it up.

If your smart card reader is already listed, you can go to the next step of installing the If it did not install correctly. Try this first: Go to Device Manager (Instructions are above), scroll down to Smart Card readers, right click the CAC reader that shows up below Smart Card Readers. It can also show up under unknown devices. Select Uninstall. It will give you a message. Once it is uninstalled, unplug the reader from your computer. Wait a few moments, then plug it back in.

It 'should' start to install itself. If that doesn't work, keep reading for other ideas below.

IF you do not see Smart card readers when checking, THEN follow along with the steps below. To install a driver onto your computer for a CAC reader, you need to first download the correct driver for the hardware you purchased, I have drivers for the most common,,, & PROCEED TO ONCE YOU'VE COMPLETED YOUR VERIFICATION OR INSTALLATION - the driver Windows 10, 8. Warn Winch M12000 Owners Manual. 1/8, 7, Vista, or XP- Save the zip file to a location of your choosing. Once you have the zip file downloaded, open the zip file (Windows built in zipping program). Copy the folder inside to a new folder. It will unzip the contents, (this is the folder you will need when you are doing the steps below). You can also use the Extract All Files button (on the left under Folder Tasks, under File, Extract All).

It will then ask where you want to save the file. I recommend placing a backslash ( ) at the end of the location on the screen. WinZip- Use the Extract button.

It will ask you where you want to save the extracted files to, I recommend your desktop. Click the desktop icon on the left. Push the little yellow folder in the upper right corner of this active window. It will prompt you for a name for the folder (type in CAC Driver). Hit OK, then select Extract (lower right corner of this window). You should now see your new folder on your desktop to open up. Keep this for a later step.